Geometrics.com

Resistivity and Geoelectrical Products

Did you know that ONLY Geometrics makes a capacitively-coupled resistivity meter? That's right! Not sure which of our instruments is right for you...it's easy! Read below then contact us immediately with any questions you may have or to place your order!

Use the Stratagem:

Geometrics Stratagem

Stratagem Kit

When you need to get information to depths that other instruments cannot easily get. It provides resistivity information in the range of 10 to 500 meters where other systems either don’t work well or are difficult to set up. For example, to get 200 meters depth with a traditional resistivity meter, you need an array that is 1 km long. For the Stratagem, you can get it with a 50 meter set up or less.

When you want an instrument that is easy to operate. The Stratagem is a fully integrated system with its own data logger, transmitter, software, printer, etc. all bundled into one system with one basic price. Other systems have lots of options and require complex configurations.

When you want an instrument that's easy to set up in the field. The Stratagem is easy compared to traditional MT systems that require burying large magnetic sensors, using chemical electrodes, spending hours on a site where the set up of the Stratagem is fast and easy... More


Use the OhmMapper:

Geometrics OhmMapper

OhmMapper

When you need speed! It is much faster than traditional resistivity systems. Surveys can be done five times faster than stakes-in-the-ground resistivity systems.

When you need clarity! It is less subject to power line and telluric noise interference than stakes so can be used in noisy areas where traditional resistivity cannot.

When you need flexibility! It can be used over frozen ground, rock, pavement, roads, and other areas that could require a traditional system to drill holes to place the stakes.

When you need a unique technique where the data can be processed with readily available, reasonably priced, industry standard processing software... More


Introducing the New MetalMapper 2×2:

The Geometrics MetalMapper 2×2 is the successor to the Geometrics MetalMapper. Both systems use advanced electromagnetic induction sensors to distinguish unexploded ordnance (UXO) from scrap metal. These innovative sensors, which have been developed and demonstrated over the past 15 years by government and private organizations, could save billions of dollars in unexploded ordinance cleanup costs at former training ranges. Before the use of these advanced EM techniques, a munitions site was mapped with a metal detector and all detected metallic objects were investigated by digging. Previous studies show that less 1% of these objects were UXO items of interest. The majority of what was dug is scrap metal, bits of shrapnel, or trash. The advanced EM technique used by the MetalMapper 2×2 and MetalMapper allow geophysicists to identify UXO targets of interest among the scrap, significantly reducing the amount of items which are investigated by digging. This reduction in digging translates to a large cost savings for the project.

MetalMapper 2x2

MetalMapper 2×2

More


NEW! NEW! NEW! - The Geode EM3D

Geode EM3D Acquisition Unit

The newest electromagnetic technology in mineral and resource exploration. Now, save time, money and improve productivity with up to 240 channels of distributed, networked EM exploration... More

Contact EMSales@geometrics.com for details and availability.



Contact our sales department for a quotation.

Find out about leasing geophysical instruments and accessories.

content management, website design, e-commerce and web development services in Erie, Pennsylvania